Fibaro Double Relay Switch
  • In-stock with Supplier

  • Ready to use out of the box

  • Free shipping on orders over $150

  • Best-in-business warranty service

  • Guaranteed safe checkout with Shopify

  • Save when you buy more than 2 devices

  • Must be installed by a licensed electrician


aeotec smart switch 6

The Fibaro Z-Wave Double Relay Switch (FGS-222) is a smart Z-Wave controller capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.

Does not integrate with the Mecha Smart Hub. Requires a separate hub to operate correctly.


  • Energy monitoring and remote control
  • Wireless on / off control, schedule, and automation of electronics plugged into switch.
  • Tested to work with Z-Wave gateways including Fibaro, Home Assistant, Oomi, openHAB, Vera and Environexus.
  • Z-Wave Plus certified.


The Fibaro Double Relay Switch uses the Z-Wave protocol. Does not integrate with the Mecha Smart Hub.

  • Power supply: 110-240 V AC, 50/60 Hz
  • Rated load current (resistive load): 6.5A per channel,
  • 10A total current
  • Power consumption: up to 0.8W
  • Power output (resistive load): 2x1500W for 240V AC
  • 2x750W for 120V AC
  • In accordance with EU standards: RED 2014/53/EU
  • RoHS 2011/65/EU
  • Operational temperature: 0-35°C
  • Active element: micro-gap relay switch μ
  • Durability (resistive load, 6.5A): 200 000 switches
  • For installation in boxes: Ø ≥ 50mm, depth ≥ 60mm
  • Radio protocol: Z-Wave
  • Radio signal power: up to 1mW
  • Radio frequency: 868.4 MHz EU;
  • 908.4 MHz US;
  • 921.4 MHz ANZ;
  • 869.0 MHz RU;
  • 865.2 MHz IN;
  • Radio transmit power: up to -1 dBm (EIRP)
  • Range: up to 50 m outdoors
  • up to 30 m indoors
  • (depending on building materials)
  • Dimensions: (L x W x H)): 42.50 x 38.25 x 20.30 mm
  • Home Assistant Ready? - Yes, using the Aeotec Z-Wave USB Controller


Every Mecha Smart Home sensor or hub comes with our 2 year warranty. Our commitment to our customers means that our supports extends outside of just the product itself. 

Need help setting up an automation or unsure where to place your sensors? We are here to help. Feel free to contact us.


- Integration with Home Assistant via their ZigBee module (does not extend to other third party platforms)

- Automation via the Mecha Smart Home Hub

- Assistance with the pairing proccess

- Assistance with the Tuya App

This warranty does not cover:

- Improper use or assembly

- Improper mounting (i.e. mounting the unit above a microwave)

- Installation of components outside their intended use (our products DO NOT OPERATE OUTSIDE)

- Damage or failure due to accident, misuse, abuse, or neglect. 

- Labor charges for part replacement or changeover. 

- Sensors used for commercial activities (please contact us - we can offer an additional warranty and support package)